CALIBRATION SERVICES

Online Recalibration Form 

Shortridge Instruments, Inc. is proud to continue providing calibration and service support for ALL MODELS (previous and current) of the AirData Multimeter, HydroData Multimeter, and FlowHood.
 
   
 

NOTE:

If a meter is over 20 years old, and has not been returned to Shortridge Instruments, Inc. for service during the past two years, an evaluation fee of $75.00 will be required if the customer chooseS to NOT have the meter repaired and recalibrated, OR if it is determined that the meter cannot be repaired.

If the meter is recalibrated/repaired, the evaluation fee will be waived, or if prepaid, applied to the cost of the recalibration.

The meter may be traded-in on a new meter at a 10% discount, and the evaluation fee will also be waived.

Members of either NEBB or AABC are not subject to this evaluation fee unless the meter is sent in repeatedly without repair.

 
 
     
   
 

CALIBRATION CERTIFICATION and COMPLIANCE

Standard Calibration Includes NIST(National Institute of Standards and Technology) traceable certification for both "As-Received" and "Final" readings.

The Shortridge Instruments, Inc. Calibration Program complies with ANSI/NCSL Z540-1, ISO 17025, and MIL-STD 45662A.

 
 
 
 
 

CALIBRATION SERVICES for AIRDATA MULTIMETERS

You May Ship

  1. The AirData Multimeter only or

  2. The AirData Multimeter and with Multimeter Accessories needing maintenance or repair or

  3. The AirData Multimeter and the FlowHood Accessories needing maintenance or repair

PACKING AND SHIPPING of UNITS


Calibration Services for AIRDATA MULTIMETERS
You May Ship
1. The AirData Multimeter only
or
2. The AirData Multimeter and with Multimeter Accessories needing maintenance or repair or
3. The AirData Multimeter and the FlowHood Accessories needing maintenance or repair
 

Calibration Services for HYDRODATA MULTIMETERS

You May Ship
The HydroData Meter only

 

Please Do Not Ship
* The HydroData Multimeter Valve Network Panel
* The HydroData Multimeter Carrying Case
* Any other HydroData Accessories

Ship Units to:     Shortridge Instruments, Inc.
7855 E. Redfield Rd.
Scottsdale, AZ 85260  
Attn: Calibration and Repair Department

Please Include the Following Information

Company Name
Shipping Address
Billing Address (if different)
Contact Name
Telephone Number/ Fax Number
E
mail Address

Carefully Package Your Meter for Shipping Package the instrument carefully with adequate cushioning, and in a very sturdy container. Do not ship a meter in an envelope.  Do not use spray foam. Spray foam can damage the meter, and it is also possible to "lose" the meter in a chunk of spray foam.

Turn-Around Time Standard turn-around time is about two weeks. Expedited turn-around time may be less if you send a completed Purchase Order that allows an option for repair time and specifies that you need EXPEDITED handling.

 

 
 
 
 
 

CALIBRATION SERVICES for HYDRODATA MULTIMETERS

You May Ship

The HydroData Meter only

 

Please Do Not Ship

* The HydroData Multimeter Valve Network Panel
* The HydroData Multimeter Carrying Case
* Any other HydroData Accessories
 
 
 
 
 

SHIP UNITS TO:

Shortridge Instruments, Inc.
7855 E. Redfield Rd.
Scottsdale, AZ 85260

Attn: Calibration and Repair Department

 

PLEASE Include THE FOLLOWING INFORMATION:

Company Name
Shipping Address
Billing Address (if different)
Contact Name
Telephone Number
Fax Number
Email Address

CAREFULLY PACKAGE YOUR METER FOR SHIPPING

Package the instrument carefully with adequate cushioning, and in a very sturdy container.
Do not ship a meter in an envelope.

Do not use spray foam. Spray foam can damage the meter, and it is also possible to "lose" the meter in a chunk of spray foam.

 
 
 
 
 

TURN-AROUND TIME

STANDARD:
Turn-around time is about two weeks.

EXPEDITED:
Turn-around time may be less if you send a completed Purchase Order that allows an option for repair time and specifies that you need EXPEDITED handling.


An EXPEDITED CALIBRATION of less than one week may result in an additional fee.


If you wish to request expedited calibration, please contact Sales at 480-991-6744 before shipping the meter to Shortridge Instruments, Inc., so that this cost may be added to your Purchase Order prior to shipment.

 
 

 

 
 

MAINTENANCE INFORMATION

It is suggested that each AirData Multimeter be returned to the factory at least every two years for recalibration, maintenance, and software update.

This will keep every meter up-to-date with ongoing improvements and new features as they are developed; and most importantly, continued maintenance will assure that each meter's original accuracy is maintained throughout the lifetime of the meter.

 
 

 

CALIBRATION SERVICES

Calibration services are not available for instruments manufactured by other companies.

SHORTRIDGE INSTRUMENTS, INC. provides factory direct calibration for ONLY the instruments manufactured by Shortridge Instruments, Inc.

Online Recalibration Form 

 

 

      ADM-880C | ADM-870C | ADM-860C | ADM-850L | CFM-850L | CFM-88L | HDM-250 | MT-440K Multi-Temp Kit | Capture Hood Kits | VelGrid


Shortridge Instruments, Inc.
7855 E. Redfield Rd.
Scottsdale, AZ 85260-3430 USA
480-991-6744   fax 480-443-1267

1999-2016 Shortridge Instruments, Inc. All Rights Reserved.
copyright policy    www.shortridge.com